Replacing The License Plate Light Bulb - Yamaha FZS10Z Owner's Manual

1. Turn signal light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11191]
7-35
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
EAU24313
7