Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha FZS10Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Headlight bulb holder
3. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
4. Install the headlight bulb cover,
and then connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
7
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-15.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
7-34
EAU24114
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
1. Turn signal light unit
2. Screw
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
EAU43002