Multi-Function Meter Unit - Yamaha FZS10Z Owner's Manual

Engine trouble warning light "
This warning light comes on or flashes
if a problem is detected in the electrical
circuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 4-8
for an explanation of the self-diagnosis
device.)
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
INSTRUMENT AND CONTROL FUNCTIONS
EAU11534
"

Multi-function meter unit

1. Coolant temperature display/air intake tem-
perature display
2. Speedometer
3. Tachometer
4. Odometer/tripmeter/fuel reserve tripmeter
5. "SELECT" button
6. "RESET" button
7. Clock
8. Fuel meter
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
EAU40179 The
equipped with the following:
G
G
G
G
G
G
G
G
G
G
G
TIP
EWA12422
G
G
4-5
multi-function meter
a speedometer
a tachometer
an odometer
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the left segment of the fuel meter
started flashing)
a clock
a fuel meter
a coolant temperature display
an air intake temperature display
a self-diagnosis device
an LCD and tachometer bright-
ness control mode
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the "SELECT" button for at least
one second.
unit is
4