Operation And Important Riding Points; Starting The Engine - Yamaha FZS10Z Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15951
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. In this case, the multi-func-
EWA10271
tion display indicates error code 30, but
this is not a malfunction. Turn the key to
"OFF" and then to "ON" to clear the er-
ror code. Failing to do so will prevent
the engine from starting even though
the engine will crank when pushing the
start switch.
EAU48020

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met.
G
G
1. Turn the key to "ON" and make
NOTICE
If a warning light does not come on
initially when the key is turned to
"ON", or if a warning light remains
on, see page 4-2 for the correspond-
ing warning light circuit check.
6-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the
sidestand up.
See page 4-22 for more informa-
tion.
sure that the engine stop switch is
set to " ".
The following warning
should come on for a few seconds,
then go off.
G
Oil level warning light
G Coolant temperature warning
light
G
Engine trouble warning light
EAU40198
lights
6
ECA15484