Yamaha FZS10Z Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
Air intake temperature mode
4
1. Air intake temperature display
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case. Turn the key to
"ON", and push the "RESET" button to
switch the coolant temperature display
to the air intake temperature display.
Push the "RESET" button again to re-
turn to the coolant temperature display.
TIP
G Even if the air intake temperature
is set to be displayed, the coolant
temperature warning light comes
on if the engine overheats.
G
When the key is turned to "ON",
the coolant temperature is auto-
matically displayed, even if the air
intake temperature was displayed
prior to turning the key to "OFF".
G When the air intake temperature
display is selected, "A" is displayed
for one second, and then the air in-
take temperature is displayed.
Self-diagnosis device
1. Error code display
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on and the display will indi-
cate an error code.
4-8
If the display indicates any error codes,
note the code number, and then have a
Yamaha dealer check the vehicle.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
LCD and tachometer brightness
control mode
1. Tachometer panel
2. Tachometer needle
3. LCD
4. Brightness level
ECA11590