Using Additional Handsets; Handset Registration - BT Stratus 1500 User Manual

Using additional handsets

You can use up to five BT Stratus 1500 additional handsets with your BT Stratus
1500 base to extend your phone system without needing to install extension
sockets for each new phone. Your BT Stratus 1500 handset can also be registered
to up to four other bases. You can then select the base you would prefer to use.
If you have purchased a BT Stratus 1500 multiple pack any additional handsets
come pre-registered to the base.
If you have purchased an additional handset separately you must register it to
your BT Stratus 1500 base before it can be used.

Handset registration

Registration
At the base:
1. Press and hold for 10 seconds. You now have 1 minute to register
the handset.
At the handset:
1. Press Menu, scroll
press SeleCt.
2. Scroll to regiStrAtion, press SeleCt.
3. Enter the system PIN (default setting 0000) and press ok. The handset will
search for the base and then display Registering. When registration is complete
you hear a long confirmation beep.
If you experience any problems, please call the Helpline on 0808 100 6556*
or to
ADvAnCeD Set
The handset is automatically assigned the next
available handset number.
If registration is not successful first time, please
repeat the process again in case the base
registration period ran out of time.
If there are already 5 handsets registered to the
base, the registration will fail. The display shows
too MAny hAnDSetS.
You must de-register another handset before you
can register the new one.
If your BT Stratus 1500 handset is registered to
and
more than one base, you can select which base
to use.
If you have a handset registered to more than one
base and then de-register it from one of them you
will need to re-select which base to use.
Until the base is selected the handset will
display regiSter.
51