Text Settings; Switch Message Reception Off / On - BT Stratus 1500 User Manual

48 Text messaging
Do you have two text phone bases connected to
the same phone line?
If you have two text phone base stations plugged
into one line, you are likely to experience
problems receiving text messages. Normally, only
one SMS enabled base unit (DECT or cordless) can
be plugged into any line. If you do want to use
two base units and still receive written text you
must delete receive service centre number from
one of the base stations. To do this on your BT
Stratus 1500, see opposite.
This will allow you to send text via either base
station but texts will only be received on the
product with the active receive centre number.
If the base unit with the active receive centre
number is a DECT product then all handsets
registered to will be able to receive text
messages.
4. Press
5. Press
eDit
Use the keypad to enter your own message template.
SenD
Delete
Delete All
press
6. Press
BACk

Text settings

Switch message reception off / on

The default setting is on.
1. From standby, press
Or
Press MENU, scroll
2. Scroll
3.
reCeive on/off
4. Scroll
5. Press
If you experience any problems, please call the Helpline on 0808 100 6556*
to see the full text.
SeleCt
to choose from:
Menu
– press to change the text. Press
SeleCt
– press to send the text.
SeleCt
– press to delete the text.
SeleCt
– press to delete all messages in the drafts box,
SeleCt
to confirm.
ok
to return to the previous menu level.
.
to
text MeSSAge
to and press SeleCt.
SettingS
is displayed. Press SeleCt.
or to or
on off
to return to the previous menu level.
BACk
to delete.
CleAr
and press SeleCt.
and press SeleCt.