IBM 9228 - IntelliStation Z - Pro Service Manual page 122

Table 7. POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Type 9228 and 9232," on page 19 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
00019502 Microprocessor 1 failed.
00019xxx Microprocessor x is not functioning.
00151200 Unrecoverable error, microprocessor x
reported IERR.
00180100 A PCI adapter has requested memory
resources that are not available.
104
IBM IntelliStation Z Pro Type 9228 and 9232: Problem Determination and Service Guide
Action
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the computer each
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System board
1. Make sure that microprocessor x is installed
correctly.
2. Replace the following components one at a time,
in the order shown, restarting the computer each
time:
a. (Trained service technician only)
Microprocessor x
b. VRM if installed
c. (Trained service technician only) System board
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the computer each
time:
a. (Trained service technician only)
Microprocessor x
b. VRM if installed
c. (Trained service technician only) System board
1. Run the Configuration/Setup Utility program.
2. Reseat each adapter.
Note: If an error LED is lit on an adapter, reseat
that adapter first. If no LEDs are lit, reseat each
adapter one at a time, restarting the computer
each time to isolate the failing adapter.
3. Replace the following components one at a time,
in the order shown, restarting the computer each
time:
a. Failing adapter
b. (Trained service technician only) System board