Error Message Display - Brother P-touch PT-1180 Service Manual

2.3.3

Error Message Display

Error is displayed when the troubles as shown below happen."ERROR" display for each country
will be displayed as follows.
U.S.A./U.K./BELGIUM: ERROR
FRENCH/CANADA: ERREUR
GERMAN: FEHLER
Input Mode
Text Input Mode
Dead Letter Input
Mode
Function Selection
Mode
Number of Copy
Setting Mode
Final Numbering Value
Setting Mode
Memory Selection
Mode
File Display Mode
Error Conditions
"SET ( )" key depressed when
exceeded 2. lines
"PRINT" key depressed when no
data in the text buffer.
"PRINT" key depressed when no
cassette installed.
"PRINT" key depressed when text
vertical size is larger than the
installed tape width.
"PRINT" key depressed when 2
line-print 6 mm tape installed.
"FEED" key depressed when no
cassette installed.
"SET ( )" key depressed when
exceeded 2 lines
"SET ( )" key depressed when
selected repeat or numbering while
no data in the text buffer.
"SET ( )" key depressed when
no letter on the cursor or when tried
numbering while no numeral on the
cursor.
"SET ( )" key depressed when
no cassette installed.
"SET ( )" key depressed when
text vertical size is larger than the
installed tape width.
"SET ( )" key depressed when 2
line-print 6 mm tape installed.
"SET ( )" key depressed when
no cassette installed.
"SET ( )" key depressed when
text vertical size is larger than the
installed tape width.
"SET ( )" key depressed when 2
line-print 6 mm tape installed.
"SET ( )" key depressed when
the selected final value is smaller
than those subject to numbering.
"SET ( )" key depressed when
tried to register to memory while no
data in the text buffer.
"SET ( )" key depressed when
tried to call-out to memory while no
file registered.
"SET ( )" key depressed when
tried to call-out the file with no
data.
II- 34
Remarks
French: "Impr" key/German "Druck"
key.
French: "Impr" key/German "Druck"
key.
French: "Impr" key/German "Druck"
key.
French: "Impr" key/German "Druck"
key.
French: "Avance" key/German "BV"
key.
Resumes to the previous mode
after erased the message.
Resumes to the previous mode
after erased the message.