Brother P-touch PT-1180 Service Manual page 44

9.2.1.4. LCD Check Display
Here, check for missing dots and the display function of the LCD.
The LCD check 1 <Fig. 4> is displayed when depressed "
The LCD check 2 <Fig. 5> is displayed when depressed "
Shifts to "28.2.2 Cassette Inspection Mode" when depressed "
9.2.2. Cassette Sensor Inspection Mode "2" Key
Here, ckeck the cassette sensor function.
Display of Fig. 7 is indicated when depressed "
of Fig. 6 (except while in the Key Inspection Mode).
Shifts to the Key Inspection Mode when depressed "
Displays the three sensor SW states. ON: 1, OFF: 0
Touch the sensor switch with the finger tip while checking ON/OFF display.
Shifts to the Key Inspection Mode when depressed "
9.2.3. Key Inspection Mode "3" Key
Here, check the key input function.
Display of Fig. 9 is indicated when depressed "
of Fig. 8 (except while in the Key Inspection Mode).
Shifts to the Key Inspection Mode when depressed "
The "CODE" key, "(
(3st row) L R, 4st row) R
depress is displayed (refer to Fig. 10) and the key to depress next is displayed when
depressed correctly while the key to depress next and "X" are displayed when depressed
erroneously. (Fig. 11 Display)
H H H H H H H H
Fig. 4
X X X X X X X X
Fig. 5
Fig. 6
C A S T
Fig. 7
C A S 0 0 0
Fig. 8
K E Y
Fig. 9
)" key", "BS( )", " ", " " key (1st row) L
L, (5st row) L
II- 29
" key.
All guidance off.
All cursor off.
" key.
All guidance on.
All cursor on.
" key. (Fig. 7 Display)
All guidance on.
X
All cursor on.
" key or depressed "2" key in the display
" key. (Fig. 8 Display)
" key. (Fig. 9 Display)
" key or depressed "3" key in the display
" key. (Fig. 10 Display)
R are depressed sequentially. The key to
R, (2st row) R L,