Brother FAX2800 Service Manual page 50

(7) Remove the two screws from the panel rear cover.
(8) Unhook the panel rear cover from 10 "X" latches provided on the control panel and take off
the panel rear cover.
(9) Fully turn the document front sensor actuator to the rear and lift it up.
(10) Unhook the control panel PCB from four "Y" latches.
(11) Slightly lift up the control panel PCB, then unlock the LCD cable connector and disconnect
the LCD flat cable. Next, unlock the FPC key connector and disconnect the FPC key.
4 -1 5