4.1.23 Side Covers R and L
(1) To take off the side cover R: Remove the two screws, lift up the front end of the side cover R,
then pull it to the front.
(2) To take off the side cover L: Remove the two screws. While pushing the left side of the
scanner grounding plate to the right (in the direction of arrow
side cover L and pull it to the front (arrow
NOTE: If you pull up the side cover L without pushing the left side of the scanner grounding
plate, the "X" section of the side cover L will catch on the scanner grounding plate.
).
4 -3 9
), lift up the front end of the