Brother FAX2800 Service Manual page 188

WSW46
Selector
No.
1
Monitoring the PC ON/OFF state
2
Parallel port output pins kept at
3
high level
4
|
Not used.
8
NOTE: Selector 3 is applicable only to models equipped with a parallel interface.
Selectors 1 and 2: Monitoring the PC ON/OFF state
For the related functions, refer to WSW36, selectors 2 and 3.
Selector 3: Parallel port output pins kept at high level
Setting this selector to "0" will keep all parallel output pins of the facsimile equipment at high
level. Use this setting if Resource Manager (bundled with MFC models) installed to WindowsNT
running on the connected PC fails to monitor the power ON/OFF state of the facsimile equipment.
(Monitor of PC ON/OFF state and parallel port kept at high)
Function
45
Setting and Specifications
No. 1 2
0 0 : Disabled
0 1 : Monitor SELECT IN
1 0 : Monitor STROBE
1 1 : Monitor both SELECT IN and
STROBE
0: Enabled 1: Disabled