Heat-Fixing Unit, Fu Lamp, And Paper Ejection Sensor Actuator - Brother FAX2800 Service Manual

4.1.11 Heat-fixing Unit, FU Lamp, and Paper Ejection Sensor Actuator

(1) Remove the two screws from the heat-fixing unit.
(2) Lift up the heat-fixing unit and disconnect the blue and brown heater wires (of the heater
harness) from the heat-fixing unit. Then disconnect the heater thermistor harness from the EL
(eraser lamp) board.
(3) Remove the paper ejection sensor actuator from the bottom of the heat-fixing unit.
4 -2 5