Table of Contents
Advertisement
5.2.3
Initializing the virtual drives
After creating the RAID set(s), you must initialize the virtual drives. You may
initialize the virtual drives of a RAID set(s) using the Initialize or Objects command
on the Management Menu.
Using the Initialize command
To initialize the virtual drive using the Initialize command
From the Management Menu, select Initialize, and then press <Enter>.
1.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
2.
The screen displays the available RAID set(s) and prompts you to select the
virtual drive to initialize. Use the arrow keys to select the virtual drive from the
Virtual Drive selection, and then press <Space>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Virtual Drive 0
5-12
LSI Software RAID Configuration Utility Ver A.62 Apr 29, 2009
BIOS Version
Initialize Virtual Drive(s)
LSI Software RAID Configuration Utility Ver A.62 Apr 29, 2009
BIOS Version
LD
RAID
0
SPACE-(De)Select, F10-Initialize
A.09.07211059R
A.09.07211059R
Virtual Drive(s) Configured
Size
#Stripes
1
151634MB
2
Select VD
StripSz
Status
64 KB
ONLINE
Chapter 5: RAID configuration
Advertisement
Table of Contents
