Intel ® Rapid Storage Technology Option Rom Utilitys - Asus TS100-E7/PI4 User Manual

5.3 Intel
Option ROM Utilitys
The Intel ® Rapid Storage Technology Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
RAID Volumes:
None defined.
Physical Devices:
Port Drive Model
0
1
2
3
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
5-24
®
Rapid Storage Technology
® Rapid Storage Technology option ROM utility:
Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008
Copyright(C) 2003-10 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
[ DISK/VOLUME INFORMATION
Serial #
ST3160812AS 9LS0HJA4
ST3160812AS 9LS0F4HL
ST3160812AS 3LS0JYL8
ST3160812AS 9LS0BJ5H
All Rights Reserved.
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
5. Exit
]
Size
149.0GB
149.0GB
149.0GB
149.0GB
[ESC]-Exit [ENTER]-Select Menu
* = Data is Encrypted
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 5: RAID configuration