Table of Contents
Advertisement
4.6
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main
Event Logs
CPU Temperature(PECI)
MB Temperature
TR1 Temperature
CPU FAN1 Speed
FRNT FAN1 Speed
FRNT FAN2 Speed
FRNT FAN3 Speed
REAR FAN1 Speed
FAN Speed Control
VCORE1
+3.3V
+5V
+12V
VBAT
+3VSB
+1.5V
CPU/MB/TR1 Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and
motherboard component temperatures. Select Ignore if you do not wish to display
the detected temperatures.
CPU FAN1 Speed; FRNT FAN1–3 Speed; REAR FAN1 Speed
[xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the speed of
CPU fans, front fans, and rear fan in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows N/A.
Fan Speed Control [Generic Mode]
Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan
speeds for more efficient system operation.
Configuration options: [Full Speed Mode] [High Density Mode] [Generic Mode]
[Whisper Mode]
VCORE1 Voltage, 3.3V Voltage, +5V Voltage, +12V Voltage,
VBAT Voltage, +3VSB Voltage, +1.5V ICHVoltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select Ignore if you do not want to detect this item.
ASUS TS100-E7/PI4
Advanced
Monitor
[
+35ºC/ +94ºF]
[
+35ºC/ +94ºF]
[
N/A
]
[
1305 RPM]
[
N/A
]
[
N/A
]
[
N/A
]
[
N/A
]
[Generic Mode]
[
+1.200 V ]
[
+3.360 V ]
[
+5.160 V ]
[
+12.384 V ]
[
+3.408 V ]
[
+3.422 V ]
[
+1.496 V ]
Boot
Tool
Exit
4-25
Advertisement
Table of Contents
