Resetting Disks To Non-Raid - Asus TS100-E7/PI4 User Manual

5.3.4

Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure on
the drive.
To reset a RAID set hard disk drive:
From the utility main menu, select 3. Reset Disks to Non-RAID and press
1.
<Enter>. The following screen appears.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model
0 ST3160812AS
1 ST3160812AS
[ ↑↓ ]-Previous/Next
2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset,
and then press <Space> to select.
3. Press <Enter> to reset the RAID set drive(s). A confirmation message
appears.
4. Press <Y> to reset the drive(s) or press <N> to return to the utility main
menu.
ASUS TS100-E7/PI4
[ RESET RAID DATA
Serial #
9LS0HJA4
9LS0F4HL
Select the disks that should be reset.
[SPACE]-Selects [ENTER]-Selection Complete
]
Size Status
149.0GB Member Disk
149.0GB Member Disk
5-29