RJ45 LAN Port
LAN 1
LAN 2
LAN 1 (CN4)
-
The Marvell 88E8052 Gigabit PCI Express x1 chip controls LAN
1.
LAN 2 (CN6)
-
The Marvell 88E8053 Gigabit PCI Express x1 chip controls LAN
2.
LAN allows the system board to connect to a local area network
by means of a network hub.
BIOS Setting
Configure the onboard LAN in the Genie BIOS Setting submenu
("PCI Device Control" section) of the BIOS. Refer to chapter 3 for
more information.
Driver Installation
Install the LAN driver. Refer to chapter 4 for more information.
Hardware Installation
2
51