Power Management Setup; Acpi Function - DFI LanParty UT CFX3200-DR User Manual

Power Management Setup

The Power Management Setup allows you to configure your system
to most effectively save energy.

ACPI Function

ACPI Suspend Type
ACPI C2 Function
ACPI C3 Function
Power Management
Modem Use IRQ
Video Off In Suspend
Video Off Method
HDD Power Down
Suspend Mode
PowerOn/WakeUp Function
Suspend Break Events
PWRON After PWR-Fail
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identi-
cal to this one.
ACPI Function
This function should be enabled only in operating systems that sup-
port ACPI. Currently, only Windows
this function. When this field is enabled, the system will ignore the
settings in the "HDD Power Down" field. If you want to use the
Suspend to RAM function, make sure this field is enabled then select
"S3(STR)" in the field below.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
S3(STR)
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
S1(POS)
Disabled
Disabled
User Define
Disabled
Suspend - > Off
V/H Sync+Blank
Disabled
Disabled
Press Enter
Press Enter
Off
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
® ® ® ® ®
98SE/2000/ME/XP supports
3
F1: General Help
9 7