The Rear Ports - PROLiNK Hurricane 9300G User Manual

The Rear Ports

6
Port
Power Switch
1
PWR
2
3 RESET
LAN
4 1X —
(RJ-45 connector)
CONSOLE
5
LINE
6
Chapter 2: Installing the Router
5
Power ON/OFF switch
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or restore to
factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used when
you cannot login to the router. E.g.: forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
4X LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
Connect a PS2/RS-232 cable (optional) to this port when connecting to
a PC's RS-232 port (9-pin serial port).
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Hurricane 9300G (802.11g) ADSL2+ Modem Router
4
3
Meaning
1
2
6