Setting Power-On/Power-Off Tone; Setting Up Voice Guide; Adjusting The Phone's Volume Settings; Adjusting The Alert Volume - Sanyo SCP-85H Operating Manual

Table of Contents

Advertisement

Tone Length to select Short or Long.
Tone Volume to select a keypress tone volume
Tone Type to select a keypress tone type.

Setting Power-On/Power-Off Tone

To set Power-On/Power-Off tone:
1. Select MENU/OK > Settings > Sounds > Ringer Type.
2. Select Power-On or Power-Off.
3. Press MENU/OK, and then select Tones, Off, My Content, or -Get New and press
MENU/OK.
4. Select a tone and press MENU/OK.

Setting Up Voice Guide

Voice Guide activates both voice prompt and key press echo functions. With this feature on, you
can hear voice prompts when using Voice-activated dialing, Voice Memo, Screen Call, etc. and
hear a voice say the numbers that you press on the keypad.
Note: The default setting is Off.
Note: When the ringer volume is set to Silence All or Vibrate All, voice prompts cannot be
heard.
Note: The key press echo function is available when you are in standby mode.
To turn Voice Guide on or off:
1. Select MENU/OK > Settings > Sounds > Voice Guide.
2. Select On or Off.
Adjusting the Phone's Ringer Volume
To adjust the ringer volume:
1.
Select MENU/OK > Settings > Sounds > Volume > Ringer.
2.
Using your navigation key, select your desired volume level, 1 Beep, Ringer Off, Vibrate
All, or Silence All and press Done (left softkey).
Tip: You can make the ringer vibrate atany volume level by checking the box next to Always
Vibrate.
Tip: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by
using the Side Volume key on the left side of your phone.

Adjusting the Alert Volume

This setting controls the alert volumes of Alarms, Picture Mail, Text Message, Voicemail, and
VoiceSMS. You can set the alert volume separate from the ringer volume setting.
To set the alerts:
1. Select MENU/OK > Settings > Sounds > Volume > Advanced....
2. Select Alarms, Picture Mail, Text Message, Voicemail, or VoiceSMS.
3. Using the navigation key, select Separate Vol.
4. Press the navigation key right or left to choose a volume level, and select Done (left
softkey).
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp-8500

Table of Contents