Configuring Queue Algorithm - 3Com 3CBLSF26PWRH User Manual

Table 3-38 CoS Setup Page item description
Item
QoS Mode
Set Default
Restore Default
Viewing CoS Settings
The CoS Summary Page displays CoS default settings assigned to ports.
Click Device > QoS > CoS. The CoS Summary Page opens.
Figure 3-50 CoS Summary Page
The CoS Summary Page contains the following fields:
Table 3-39 CoS Summary Page item description
Item
Port
Default CoS

Configuring Queue Algorithm

The Queue Setup Page contains the queue algorithm information.
Click Device > QoS > Queue. The Queue Setup Page opens.
Specifies if QoS is enabled on the switch. The possible values are:
Disabled: Restores the switch factory defaults for QoS values and
disables configure QoS values on the switch.
Enabled: Enables configure QoS values on the switch.
Sets the default user priority. The possible field values are 0-7, where 0 is the
lowest and 7 is the highest priority.
Restores the switch factory defaults for CoS values.
Displays the interface for which the CoS default value is defined.
Displays the default CoS value for incoming packets for which a VLAN
priority tag is not defined.
3-47
Description
Description