Viewing Logs - 3Com 3CBLSF26PWRH User Manual

Table 3-73 Logging Setup Page item description
Item
Enable Logging
Syslog IP Address
Syslog Port

Viewing Logs

The Logging Display Page contains all system logs in a chronological order that are saved in RAM
(Cache).
Click Administration > Logging > Display. The Logging Display Page opens.
Figure 3-94 Logging Display Page
The Logging Display Page contains the following fields and buttons:
Specifies if device local logs for Cache and servers are enabled.
Console logs are enabled by default.
Severity level: Specifies the minimum severity level for which a
message will be logged. When a severity level is selected, all
severity level choices above the selection are selected
automatically. The possible field values are:
Emergency: The highest warning level. If the device is down or
not functioning properly, an emergency log message is saved
to the specified logging location.
Alert: The second highest warning level. An alert log is saved, if
there is a serious device malfunction; for example, all device
features are down.
Critical: The third highest warning level. A critical log is saved if
a critical device malfunction occurs; for example, two device
ports are not functioning, while the rest of the device ports
remain functional.
Error: A device error has occurred, for example, if a single port
is offline.
Warning: The lowest level of a device warning. The device is
functioning, but an operational problem has occurred.
Notice: Provides device information.
Info: Provides device information.
Debug: Provides debugging messages.
Defines the IP Address to upload system Log messages
Defines the UDP Port through which system Log messages are
uploaded. The field default is 524, and not be modified.
3-85
Description