Configuring The Switch; Configuring System Access; Defining System Access - 3Com 3CBLSF26PWRH User Manual

3

Configuring the Switch

Configuring System Access

Network administrators can define user name, password, and access level for users using the System
Access Interface. The Multi-Session Web feature is enabled on switch and allows 10 users to be
created and access the switch concurrently. Access levels provide read or read/write permissions to
users for configuring the switch. Login information is managed in the local database. A unique password
is required of each user. Two access levels exist on the Web Interface:
Management access level: Provides the user with read/write access rights. There is always one
management level user configured for the switch.
Monitor access level: Provides the user with read-only system access rights.
This section contains the following topics:

Defining System Access

Modifying System Access
Removing System Access
Viewing System Access Settings
To ensure that unauthorized users do not access the Web interface, 3Com recommends that you set an
admin password when you first configure the switch.
Defining System Access
The System Access Setup Page allows network administrators to define users, passwords, and access
levels for users using the System Access Interface.
Click Administration > System Access > Setup. The System Access Setup Page opens.
Figure 3-1 System Access Setup Page
3-1