Configuring Cable Diagnostics - 3Com 3CBLSF26PWRH User Manual

Table 3-75 Port Mirroring Setup Page item description
Item
Select port type
Removing Port Mirroring
The Port Mirroring Remove Page permits the network manager to terminate port mirroring or
monitoring.
Click Monitoring > Port Mirroring > Remove. The Port Mirroring Remove Page opens.
Figure 3-96 Port Mirroring Remove Page

Configuring Cable Diagnostics

The switch provides cable diagnostic, which helps you detect and resolve issues with the attached
cables.
This section contains the following topics:
Configuring Cable Diagnostics
Viewing Cable Diagnostics
Configuring Cable Diagnostics
The Cable Diagnostics Page permits the network manager to perform tests for individual port.
Click Monitoring > Cable Diagnostics > Diagnostics. The Diagnostics Page opens.
Defines the monitor port (destination port) or mirror port (source
port). The possible values are:
Monitor: Defines the port as the monitor port.
Mirror: Defines the port as the mirrored port to be monitored
and indicates the traffic direction to be monitored. If selected,
the possible values are: Mirror In (Enables port mirroring on the
port RX), Mirror Out (Enables port mirroring on the port TX).
3-87
Description