Removing Snmp Communities; Defining Snmp Traps - 3Com 3CBLSF26PWRH User Manual

Item
Standard
User Defined
Access Mode

Removing SNMP Communities

The SNMP Communities Remove Page allows the system manager to remove SNMP Communities.
Click Administration > SNMP > Communities > Remove. The SNMP Communities Remove Page
opens.
Figure 3-66 SNMP Communities Remove Page
To Remove SNMP Communities:
1) Select the SNMP Communities.
2) Click Remove.

Defining SNMP Traps

The SNMP Traps Setup Page allows the system manager to defining filters that determine whether
traps are sent to specific users, and the trap type sent.
Click Administration > SNMP > Traps > Setup. The SNMP Traps Setup Page opens.
Selects pre-defined community strings. The possible field values are:
Public: Displays the pre-defined public community string name.
Private: Displays the pre-defined private community string name.
Defines a user-defined community string name.
Defines the access rights of the community. The possible field values are:
Read Only: Management access is restricted to read-only, and changes
cannot be made to the community.
Read Write: Management access is read-write and changes can be made
to the switch configuration, but not to the community.
3-59
Description