Olivetti Fax-Lab S101 Instructions Manual page 42

O
UTGOING MESSAGE ONLY
Using this function, whenever an incoming call is received,
the TAD plays the OGM 1 but does not record any incoming
messages.
You can use this function when you expect to be away for a
long time and it would not be possible to record all mes-
sages received in your absence.
In this case, in place of the ordinary outgoing message, it is
advisable to record a different one, for example:
"From 22nd June to 19th September only faxes will be
accepted. No incoming messages will be recorded".
1. Press the key
until the display shows:
2. To confirm the setting, press the key:
The display shows:
3. Press the key
until the display shows:
4. To confirm the setting, press the key:
The display shows:
5. To view the other available option: "ANNOUNC.ONLY:ON"",
press the keys:
/
6. To confirm your choice, press the key:
The display shows:
If you have already recorded OGM 1, the display will show
the message "PLAYING" and the TAD will play it back.
If you have not recorded it, the display will show the mes-
sage "NOT RECORDED".
7. To change the outgoing message recorded previously or
to record a new one.
The display shows:
8. To start recording, press the key:
The display shows:
18
S
ILENT RECEPTION OF INCOMING MESSAGES
Using this function you can receive messages confiden-
tially. In other words, the TAD receives messages without
playing them over the speaker so that any other persons
present cannot hear your messages.
1. Press the key
until the display shows:
2. To confirm the setting, press the key:
The display shows:
3. To confirm the setting, press the key:
The display shows:
4. To view the other available option: "ICM SPEAKER:ON",
press the keys:
/
5. To confirm your choice, press the key:
6. To return the fax machine to the initial stand-by mode, press
the key:
T
O PRINT THE TAD CONFIGURATION
PARAMETERS
1. Press the key
until the display shows:
2. To confirm the setting, press the key:
The display shows:
3. Press the key
until the display shows:
4. To confirm the setting, press the key:
The display shows:
5. If the display shows: "PRINT OUT:EXIT", to display the
option: "PRINT OUT:
/
6. To start printing, press the key:
Once this operation has been completed, the fax machine
automatically returns to its initial stand-by status.
", press the keys: