Olivetti Fax-Lab S101 Instructions Manual page 27

T
O SEND A DOCUMENT
W
HAT DOCUMENTS MAY BE USED
Dimensions
• Width 210 mm
• Length 105 mm - 600 mm
• Unit weight 70 - 90 gr/m
N
EVER USE
• curled paper
• excessively thin paper
• torn paper
• damp or set paper
• excessively small paper
• crumpled paper
• carbon paper
In addition, in order to avoid damaging your fax machine and invali-
dating your guarantee, make sure that the documents you are to use
do not contain:
• staples
• paper clips
• adhesive tape
• correcting liquid or glue that has not yet dried.
In all these cases, photocopy the document and send the copy.
T
RANSMISSION AND RECEPTION OPERATIONS
2
(max. 5 sheets)
T
O PLACE THE DOCUMENT IN THE AUTOMATIC DOCUMENT
( )
FEEDER ADF
1. Push the paper support extension in the slot until it clicks into
position.
2. Insert the document in the automatic document feeder (ADF) with
the side to be sent facing downwards.
3. Once the document has been inserted in the feeder, the display
shows on the top line:
and on the bottom line, the default contrast value: "NORMAL".
T
O ADJUST THE CONTRAST AND RESOLUTION
Before sending a document you can make some adjust-
ments so as to optimize the printing quality.
T
O ADJUST THE CONTRAST
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
4. Press the key
until the display shows:
3