Switching On A Zone And Setting A Power Level; Switching On The Dual Circuit Zones - Baumatic B27SS Instruction Manual

Switching on a zone and setting a power level

IMPORTANT: A zone must be selected within 10 seconds of switching
the hob on.
o If you hold down either the minus or plus button and 0 appears
on the zone indicator, you will need to press either the plus or
minus button again before the power level will adjust.

Switching on the dual circuit zones

The double hyperspeed zones have two cooking areas that you can use
a central section and an outer section. You can use the central section
(A) independently or both sections (B) at once.
o Press the plus (4) button for
the zone that you want to use.
o Adjust the zone between
power levels 1 and 9, using
the plus (4) and minus (5)
buttons. By holding down
either of these buttons, the
value on the zone indicator
(6) will adjust up or down
every 0.3 seconds.
o If you press the minus button
first, then power level 9 will be
selected.
12