Switching The Hob Top On; Switching On A Zone And Setting A Power Level; Switching Off A Zone - Baumatic BHC605 Instruction Manual

Switching the hob top on

o This means that the hob has entered stand-by mode.

Switching on a zone and setting a power level

IMPORTANT: A zone must be selected within 2 minutes of switching
the hob on.
o Adjust the zone between power levels 1 and 9, using the plus
(4) and minus (2) buttons. By holding down either of these
buttons, the value on the zone indicator (3) will adjust up or
down.

Switching off a zone

o The letter "H" will show in the cooking zone indicator (3), (see
the section on the "residual heat indicator" on the next page).
o Press the ON/OFF button (9) to switch on the
appliance.
o The hob will beep once and all of the cooking
zone indicators will light briefly, then go out.
o Press the cooking zone plus button (4)
of the zone that you want to use.
o Press the cooking zone minus button
(2) of the zone that you want to switch
off.
o Hold the button down until the number
in the cooking zone indicator reaches
"0". After a few seconds, the zone will
switch off automatically.
11