Switching On A Zone And Setting A Power Level - Baumatic BHI650 User Manual

Switching on a zone and setting a power level

IMPORTANT: A zone must be selected within 1 minute of turning the
hob on.
level will show in the relevant display.
o You can alter the power level at any time during cooking using
the slider control.
If the display flashes with the symbol shown opposite,
alternatively with the heat setting, this means that:
• You have not placed a pan on the correct cooking zone or,
• The pan you are using is not suitable for induction cooking or,
• The pan is too small or not properly centred on the cooking
zone.
o Make sure that the bottom of the pan and
the surface of the hob are clean and dry
before placing a suitable pan on the
cooking zone that you wish to use.
o Press the cooking zone selection button of
the cooking zone that you want to use. An
indicator next to the relevant button will
flash.
o Select the power level for the cooking
zone that you have selected using the
slider control. If you do not choose a
heat setting within 1 minute of turning
the hob on, the hob will switch off
automatically.
o Sliding the slider control to the right
will increase the power level while
sliding the slider control to the left will
decrease the power level. The power
13