Replacing A High-Mount Brake Light Bulb - Honda Odyssey Owner's Manual

Replacing a High-mount Brake
Light Bulb
SCREWS
COVER
1. Remove the two screw covers on
the light assembly by prying on
the side edge with a flat-tip
screwdriver.
Remove the screws with a Phillips-
2.
head screwdriver, then remove
the light assembly from the
tailgate.
SOCKET
3. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
2010 Odyssey
5. Press the brake pedal to make
sure the new bulb is working.
6. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
7. Reinstall the high-mount brake
light assembly into the tailgate.
BULB
Tighten the two screws and
reinstall the covers.
Lights
443