Fasten And Position The Seat Belts - Honda Odyssey Owner's Manual

2010
Hide thumbs Also See for Odyssey:
Table of Contents

Advertisement

5.
Fasten and Position the Seat
Belts
Insert the latch plate into the buckle,
then tug on the belt to make sure the
belt is securely latched. Check that
the belt is not twisted, because a
twisted belt can cause serious
injuries in a crash.
The center seating position of the
third row has a detachable seat belt
that can be unlatched and retracted
into the ceiling to allow the seat to be
folded down. See page
16
unlatch and relatch the seat belt.
Except U.S. LX and Canadian DX
models
The plus-one seat that can be
installed in the center seating
position of the second row also has a
detachable seat belt.
for how to
Position the lap part of the belt as
low as possible across your hips,
then pull up on the shoulder part of
the belt so the lap part fits snugly.
This lets your strong pelvic bones
take the force of a crash and reduces
the chance of internal injuries.
If necessary, pull up on the belt again
to remove any slack, then check that
the belt rests across the center of
your chest and over your shoulder.
2010 Odyssey
Protecting Adults and Teens
This spreads the forces of a crash
over the strongest bones in your
upper body.
Improperly positioning the seat
belts can cause serious injury
or death in a crash.
Make sure all seat belts are
properly positioned before
driving.
If the seat belt touches or crosses
your neck, or if it crosses your arm
instead of your shoulder, you need to
adjust the seat belt anchor height.
CONTINUED
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 odyssey

Table of Contents