Brake System Indicator - Honda Odyssey Owner's Manual

U.S. Canada The brake system
indicator normally
comes on when you
turn the ignition switch to the ON
(II) position, and as a reminder to
check the parking brake. It will stay
on if you do not fully release the
parking brake.
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
the next time you stop at a service
station (see page 435 ).
On Touring models
You will also see a ''BRAKE FLUID
LOW'' message on the multi-
information display (see page
If the fluid level is low, take your
vehicle to a dealer, and have the
brake system inspected for leaks or
worn brake pads.
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system's dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.
On Touring models
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display (see page
88 ).
2010 Odyssey

Brake System Indicator

Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see
Towing on page
If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.
If the ABS indicator and the VSA
indicator come on with the brake
system indicator, have the vehicle
inspected by your dealer
immediately.
88 ).
Emergency
486 ).
479