Memory Position Setup - Honda Odyssey Owner's Manual

Multi-Information Display
Position Setup
If ''MEMORY POSITION LINK'' is
''ON,'' the driver's seat and outside
mirrors move to the positions stored
in the memory when you open the
driver's door, using the remote
transmitter.
Refer to page 184 for setting the seat
position memory. Also refer to page
149 for remote transmitter use.
116

Memory Position Setup

While the multi-information display
shows ''POSITION SETUP,'' press
the SEL/RESET button on the
steering wheel. The display changes
to ''MEMORY POSITION LINK'' as
shown above.
2010 Odyssey
Press the SEL/RESET button. The
display changes as shown above.
Select ''ON'' or ''OFF'' by pressing
the INFO button, and enter your
selection by pressing the SEL/
RESET button.