Changing The Engine Oil And Filter - Honda Odyssey Owner's Manual

2010
Hide thumbs Also See for Odyssey:
Table of Contents

Advertisement

Changing the Engine Oil and Filter

Always change the oil and filter
according to the maintenance
messages shown on the odometer/
trip meter display or on the multi-
information display. The oil and filter
collect contaminants that can dam-
age your engine if they are not
removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
technician.
428
DRAIN BOLT
WASHER
1.
Run the engine until it reaches
normal operating temperature,
then shut it off.
Open the hood, and remove the
2.
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
2010 Odyssey
OIL FILTER
3.
Remove the oil filter, and let the
remaining oil drain. A special
wrench (available from your
dealer) is required.
Make sure the oil filter gasket is
not stuck to the contacting surface
of the engine. If it is, remove it
before installing a new oil filter.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 odyssey

Table of Contents