Netware Installation And Configuration Notes - Adaptec AAA-133U2 - AAA 133 RAID Controller Hardware Manual

Downloaded from www.Manualslib.com
AAA-130U2 Series Installation and Hardware Guide
NetWare 5.0
1
Copy the cda1000h.ham file from the Adaptec Array1000U2
Family Manager Set driver disk into the server's startup direc-
tory (e.g., c:\nwserver ) on your hard disk.
Note:
For NetWare 5.0, the cda1000h.ham file is in
a:\netware .
2
If necessary, modify the load command line in the startup.ncf
so that the proper path to the driver is specified. The correct
syntax to load the cda1000h.ham driver is
load [ pathname ]cda1000

Netware Installation and Configuration Notes

Larger Than 4 GByte Arrays
When installing NetWare on an array 4 GBytes or larger, the Install
program erroneously reports that the DOS partition is too small. It,
however, does allow you to continue installation. Ignore this error
message.
Unloading cda1000h.ham
When running Adaptec CI/O Management Software, do not unload
cda1000h.ham while iomgr.nlm is still loaded. Unstable behavior
may result.
5-8
manuals search engine