Downloaded from
www.Manualslib.com
AAA-130U2 Series Installation and Hardware Guide
3
Plug the remaining connectors on the cable to your internal
devices.
Figure 2-9. Connecting Ultra2 SCSI Devices
Note:
If your 68-pin internal Ultra2 SCSI cable has a built-in
terminator at the end of the cable (such as the cable pro-
vided in Adaptec AAA-131U2/133U2 kits), disable termina-
tion on all devices connected to the cable. If there is no built-
in terminator, terminate the device connected to the end of
the cable only and disable termination on all remaining
devices connected to the cable.
2-12
manuals search engine
Ultra2 SCSI Devices
Terminator