Installing The Driver When Windows Nt Is Already Installed - Adaptec AAA-133U2 - AAA 133 RAID Controller Hardware Manual

Downloaded from www.Manualslib.com
AAA-130U2 Series Installation and Hardware Guide

Installing the Driver When Windows NT is Already Installed

To update or install the cda1000.sys driver if Windows NT is
already installed, follow these steps:
1
Start Windows NT.
2
Click the Start button on the Windows NT task bar, and then
point to Settings.
3
Click the Control Panel.
4
Double-click the SCSI Adapters icon.
5
Click the Drivers tab, and then click the Add button.
6
In the Install Driver window, click the Have Disk button.
7
Insert the Adaptec Array1000U2 Family Manager Set driver
disk in your floppy disk drive and press Enter. Enter the fol-
lowing path to the installation files and then click OK.
a:\winnt
The Adaptec Array1000U2 Family Adapter driver is high-
lighted by default.
8
In the Install Driver window, Click OK.
9
You must restart your computer for the changes to take effect.
Click Yes to restart your computer.
10
When driver installation is complete, install Adaptec CI/O
Management Software. Refer to the Adaptec CI/O Management
Software User's Guide for instructions on installing and using
the software.
4-4
manuals search engine