Integrated Devices Screen - Dell PowerVault NX3100 Hardware Owner's Manual

Option
Hard-Disk Drive
Sequence
USB Flash Drive
Emulation Type
(Auto default)
Boot Sequence Retry
(Disabled default)

Integrated Devices Screen

Option
Integrated SAS
Controller
(Enabled default)
User Accessible USB
Ports
(All Ports On default)
Internal USB Port 1
(On default)
Internal USB Port 2
(On default)
Embedded NIC1 and
NIC2
(Enabled default)
Embedded Gb NICx
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled)
MAC Address
48
Using the System Setup Program and UEFI Boot Manager
Description
Determines the order in which the BIOS attempts to
boot from hard drives in the system during system
startup.
Determines the emulation type for a USB flash drive.
Hard disk allows the USB flash drive to act as a hard
drive. Floppy allows the USB flash drive to act as a
removable diskette drive. Auto automatically chooses an
emulation type.
If this field is enabled and the system has failed to boot,
the system reattempts to boot after 30 seconds.
Description
Enables or disables the integrated storage controller.
Enables or disables the user-accessible USB ports. Options
are All Ports On, Only Back Ports On, and All Ports Off.
Enables or disables the internal USB port.
Enables or disables the internal USB port.
Enables or disables the OS interface of the two embedded
NICs. (The NICs may also be accessed through the
system's management controller.)
Enables or disables the embedded NICs. Options are
Enabled, Enabled with PXE, and Enabled with iSCSI
Boot. PXE support allows the system to boot from the
network.
Displays the MAC address for the NIC.