Dell PowerVault NX3100 Hardware Owner's Manual page 93

6 Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector on the expansion-card
riser.
7 Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
8 Close the expansion-card latch. See Figure 3-13.
Figure 3-13. Installing or Removing an Expansion Card
1
1 expansion-card riser
3 expansion card
9 Connect any cables to the expansion card.
2 expansion-card latch
Installing System Components
2
3
93