Dell PowerVault NX300 Hardware Owner's Manual page 87

Insert the hard-drive carrier into the drive bay until the carrier
b
contacts the backplane.
Close the handle to lock the drive in place. With the lever on the
c
hard drive carrier open, slide the hard drive into the drive bay until the
carrier contacts the backplane (see Figure 3-5).
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-6.
Figure 3-6. Installing a Hard Drive Into a Drive Carrier
2
1
1 drive carrier
3 hard drive
*Screws are supplied along with the hard drives ordered from Dell.
2 screws (4)*
4 SAS/SATA screw hole
Installing System Components
3
4
87