Dell PowerVault NX300 Hardware Owner's Manual page 50

Table 1-3. System Messages (continued)
Message
Timer chip
counter 2 failed
TPM
configuration
operation
honored. System
will now reset.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
TPM failure
50
About Your System
Causes
Faulty system board.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed.
A Trusted Platform Module
(TPM) function has failed.
Corrective Actions
See "Getting Help" on
page 177.
Information only.
Enter I or M to proceed.
See "Getting Help" on
page 177.