Before You Begin - AT&T Four-Line Intercom Speakerphone 955 User Manual

955_00_1ATT CIB #change
• Check to be sure your box contains:
• You must have a modular telephone jack and an electrical outlet
not controlled by a wall switch near where you're installing the
phone.
• The total length of telephone wiring used in this system is
important. If the total length of telephone wiring is more than
600 feet, you may need to use a special filter device. You can call
1 800 222–3111 for information about this filter. You'll need to
contact a professional to install this filter.
• Identify the number of phone lines you'll use.
• Plan the layout of your phone system.
• All connected phones must have the same Line 1 phone number
for the Intercom and Page features to work.
• Assign a different Intercom Extension Number (11 through 22) to
each 955 telephone. You'll need to do this individually at each
telephone.
• Decide if you want a private line. A private line does not appear
on all connected phones.
• You must subscribe to combined Caller ID with Call Waiting as a
single service to see Caller ID information for Call Waiting calls.
Check with your local telephone company for availability.
• Choose your setting for each system feature. You will need to
program the features during installation (see "Features List").
10/24/02 9:48 AM

BEFORE YOU BEGIN

1 Telephone
1 Handset
1 Handset cord
1 Mounting base
2 Seven-foot line cords
1 Eight-inch line cord
1 Power adapter
1 Warranty insert
1 9V battery
1 User's Manual
Page 3
3