Before You Begin; Parts List; Tools Needed - AT&T 945 User Manual

Four-line small business system speakerphone part 2
Hide thumbs Also See for 945:
Table of Contents

Advertisement

945 CIB 2ATT
3/14/05

BEFORE YOU BEGIN

Parts List

Your box should include:
Four-Line Small Business System
Speakerphone 945
© 2005 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.
Two seven-foot twisted pair line cords
Base unit with wedge attached

Tools Needed

You will also need a small Phillips head screw driver to install your phone.
2
9:58 AM
Page 2
This User's
Manual
USER'S MANUAL
Part 2
Please also read
Part 1 — Important
Product Information
Eight-inch line cord
Quick
Start
Guide
QUICK START GUIDE
Four-Line Small Business System
Speakerphone 945
This Quick Start Guide provides basic instructions. For additional
installation options and complete instructions which allow you
to use all features of this phone, refer to your AT&T Four-Line
Small Business Speakerphone 945 User's Manual, Part 2.
INSTALLATION
Installation of a DSL splitter and an AT&T Z800A filter is required
to use the advanced features of this telephone if you have DSL
(Digital Subscriber Line) service. Please see "DSL Users" starting
on page 4 of your User's Manual, Part 2 for details.
If you are installing multiple phones in your phone system,
you must install and program one set at a time. Each phone
MUST be assigned a unique extension number.
Battery Installation
Install a 9V alkaline battery (purchased separately) in order to use some
features of this telephone in the event of a power failure. If power fails and
a working battery is installed, all four lines of this phone will work only to
answer calls with the handset or headset, and to dial calls using the dial pad
keys and the One Touch or Redial features. No other features will work until
power is restored.
1
Remove the wedge from the underside of the base unit.
Press on the tabs and pull the wedge away from the phone.
2
Remove the battery compartment screw with a small
Phillips head screwdriver.
3
Pull on the tab to remove the battery compartment cover.
continued on page 2
1
Handset
Coiled
handset cord
Power adapter

Advertisement

Table of Contents
loading

Table of Contents