AT&T Four-Line Intercom Speakerphone 955 User Manual page 7

955_00_1ATT CIB #change 10/24/02 9:48 AM Page 5
BEFORE YOU BEGIN
You may, however, live in a region where for calls within your own area
code, you must dial 10 digits (that is, the three-digit area code and phone
number). If this applies to you, enter "000" for the Home Area Code and
enter your area code as a Local Area Code. After programming, if you
receive a call from within your area code, the screen displays the 10 digits
of the phone number. When you use Display Dial, the unit will know to
dial your area code along with the seven digits of the telephone number
(and "1" if appropriate).
Be sure to follow the directions on page 20 for programming the Home
Area Code.
Local Area Code: Most users dial 11 digits to make calls outside their
Home Area Code. These users do not need to program any Local Area
Codes.
However, if you dial only 10 digits to make calls to some areas outside
your Home Area Code (without dialing "1"), then program these Local Area
Codes into the unit (up to five Local Area Codes can be programmed).
See page 20 for directions.
After programming, if you receive a call from one of these Local Area Codes,
the screen displays the 10 digits of the phone number. When you use
Display Dial, the unit will dial the 10 digits, without inserting a "1" before
the area code.
Line Group: A group of 955 phones sharing some lines within a multi-phone
system.
Navigation buttons: These are the buttons used when programming
your 955 system and for scrolling through feature options (+, -, >, <,
E, S).
Prime Line: This is the line on your phone you designate to be selected
automatically when you lift the handset, press K, or press h.
5