Set Delay Ring; Turn Line Usage On Or Off For Each Line; Assign The Prime Line (Line Preference) - AT&T Four-Line Intercom Speakerphone 955 User Manual

955_00_1ATT CIB #change
SET UP SYSTEM FEATURES

Set Delay Ring

NOTE: This feature is for use with Centrex systems only.
NOTE: If you choose to set a delayed ring on a phone with COVM
service, the phone may not ring at all before COVM picks up the call.
1
Press G.
2
Press - until the screen displays DELAY RING, then press >.
3 Press - or + to select the desired setting. (One ring is about six
seconds.)
4 Press S to store your selection.

Turn Line Usage On or Off for Each Line

If you are not using all four phone lines, you need to turn off Line Usage
for the unused lines. If you expand to a third or fourth line, turn Line
Usage back on.
You may also restrict the use of certain lines on this phone to intercom
and paging only, by turning off Line Usage for each line to be restricted.
When Line Usage is turned off, that line cannot be used to answer
incoming calls or to make outgoing or transfer calls.
1 Press G.
2 Press - until the screen displays LINE USAGE, then press >.
3 Press - or + until the screen displays the desired line number,
then press >.
4 Press - or + to select the desired setting.
5 Press S to store your selection.
6 Repeat Steps 1-5 to change the Line Usage status for additional
lines.

Assign the Prime Line (Line Preference)

1 Press G.
2
Press - until the screen displays PRIME LINE, then press >.
3
Press - or + to select the desired setting.
4 Press S to store your selection.
18
10/24/02 9:48 AM Page 18