Set Up System Features - AT&T Four-Line Intercom Speakerphone 955 User Manual

955_00_1ATT CIB #change
Use the Navigation buttons to program or change the system features setup.
Store your
selection and
move to next
feature
Enter
Programming
mode
• Press G to enter the Programming mode. The screen displays:
NOTE: If you do not press a key to continue programming within
20 seconds, the system automatically exits the Programming mode.
• Press - or + repeatedly to move through the list of options.
• Press > to choose the option currently displayed.
• Press S to store your selections and return to the 'home screen'
for the feature currently displayed.
You can set up one feature at a time or you can set up a feature and then
move on to set up another feature. After you change one feature, press
+ or - to select another feature. When you are finished with features
setup, press E to exit Programming mode.
NOTE: After a feature is successfully programmed, the system beeps
once. If the system beeps twice, repeat the steps to set up the feature.
10/24/02 9:48 AM

SET UP SYSTEM FEATURES

Exit Programming
mode
Page 15
Scroll through
default settings
Feature
Options
options
Confirm
option choice
Used when
resetting
features to
15