Lucent Technologies SPIRIT 1224 Controller Customer Installation Instructions Manual page 17

Typical cable installation for one telephone location.
Finish your installation by routing cables to all other telephone locations and installing
modular connecting blocks for each one. Be sure to label both ends of each cable run identically.
1 2
'
Identical labels
TELEPHONE
LOCATION
i
Modular connecting block
Route your other cables and terminate each one in a
modular connecting block. Be sure to label both ends of
each cable run identically.
Cable clip
Dress the cables neatly through the lower openings and
secure them with cable clips or ties.
Cable clip
Cable